person one：
1) Connection-oriented protocol. choose 2
My ans. TCP, SPX
2) Connectionless-oriented Protocol. choose2
My ans. UDP, IPX(not sure)
3) If T1 line fails, what method of redundancy is used for email purposes.
My ans. ISDN (not sure either), choices are T3, ATM, CO3?, ISDN, X.25
4) Dial up protocol, 5yrs old computer, cannot use auto IP addressing.
My ans. SLIP
5) Dial up protocol. choose all that apply, there are only 2 selections, PPP SLIP,
My ans. both
6) What network tool is used to monitor activities on hubs, routers, bridges, etc.
My answ. SNMP not sure, other choices are Performance Monitor, Protocol analyzer.
7) Almost similar to above question, Using Windows 95, want to monitor network through the
router (not the same wordings). I chose SNMP again, other choices, Performance monitor, proto
analyzer.
8) This one is tricky, I don't remember the question but the choices are NDIS 2.0, NDIS 3.0,
NDIS 3.1, ODI. Just know if these versions are valid.
9) Using Win NT station, small groups, administering their own resources, only one need to
share her resources, what security implementation?
My answ. user-level sec., sometimes I doubt this answ and could use share-level but I thought
share level is not an option in NT.
10) Using NWLink, cannot talk to the network.
My ans. client using inc. frame type
11) Can connect using IP address, but having problem using server's name. Whre do you start
troubleshooting. My ans. WINS server.
12) This one, the question was vague, something about NETBIOS and not use same name and not
causing problem (something like that) choose 3. My ans. workgroup name, share name, domain name. I left computer name out.
13) Using a backbone between floors.
My ans. 10Base5
14) High level protocol for NETbios to handle file sharing. A lot of choices for this.
My ans. SMB
15) Scenario: connect 2 branch office with 1 main office 20 miles.
Proposed: use 10Base5. Does not satisfy required.
16) Connect 3 cities at least 1Mbps., Opt: must continue to comm. if one link fails. Proposed: 2 T1. My ans. Satisfy required but not optional.
17) Must reduce network utilization by 50%. Proposed: Something about increasing/decreasing
windows of TCP/IP.... I don't know about this one. I chose D.
18) Something about dragging the devices picture to the drawing, says "drop here". It's weird.
The question was your network has no communication because you haven't completely connected
the connectivity devices. Choices are repeaters, bridge, hubs, routers. It has Ethernet, token ring. person two：
1. The backbone of your network is a WNT serv. Lately it's been experiecing some router
overloading or saturation. What do you use to check it?
A. ICMP source quench (received)
2. Drag and Drop- DHCP definitions:
Scope option, DHCP relay agent (answer is remote subnet way of obtaining IP ddr.),Global,
exclusion, client option.
3. IP config window with an IP address and subnet mask. What are 2 valid host I.D.
A. remember that they both have to be in the same subnet. Ex. a mask of 255.255.252.0-
intervals of 8. Thus 0-7, 8-15..etc.
4. Two questions on wkst.1 could not connect to a local host and remote host (same
wordings)
A. invalid subnet mask A. Invalid subnet mask. (no option for D.G.)
5. You want tosee port status?
A. nbtstat or netstat? ( i think it's nbtstat)
6. Two scenario on Unix and WINNT to be able to browse each other on the network...
A. Know your DNS-Hostfile, WINS-LMhostfile, static entries....etc..
7. Sunet 1 and Subnet 2 exibit (trancenders) wrkst.1 could not connect to Server on local
destination.
A. The exibit shows invalid D.G. (router interface) for 2 wksts. to throw you off. But you
know better. WRONG D.G.
8. You can UNC a server on remote but could not FTP.
A. no access to FTP directory (braindump)
9. Third DNS on the net to use for the internet...
A. (no option to configure with cache).....only use as a forwarder for the prim. and sec.
10. Subnets with WINS and UNIX machines....
A. know where to put your dhcp relay agents, UNIX does not use WINS
育路网
|
